Information about
Electronics;
In this blog
,I will be describe how to find the
total resistance of any cicuit.
Resistance;
Resistance
is a measure of the opposition to current flow in an electrical circuit.
Resistance is measured in ohms, symbolized by the Greek letter omega (Ω). Ohms
are named after Georg Simon Ohm (1784-1854), a German physicist who studied the
relationship between voltage, current and resistance.
Resistors in
Series and Parallel;
Most
circuits have more than one component, called a resistor that limits the flow
of charge in the circuit. A measure of this limit on charge flow is called
resistance. The simplest
combinations
of resistors are the series and parallel connections illustrated.
Resistances in series;
A series
circuit is a circuit in which resistors are arranged in a chain, so the current
has only one path to take. The current is the same through each resistor. The
total resistance of the circuit is found by simply adding up the resistance
values of the individual resistors:
equivalent
resistance of resistors in series : R = R1 + R2 + R3 + ...
Resistance in parallel;
A parallel
circuit is one that has two or more paths for the electricity to flow, the
loads are parallel to each other. If the loads in this circuit were light bulbs
and one blew out, there is still current flowing to the others because they are
still in a direct path from the negative to positive terminals of the battery.
You can find
TOTAL RESISTANCE in a Parallel circuit with the following formula: 1/Rt = 1/R1
+ 1/R2 + 1/R3 + ... " Before we get into the calculations, remember what
we said at the start of this section: "The total resistance of a parallel
circuit is NOT equal to the sum of the resistors (like in a series circuit).


